4 Things You Absolutely Must Check Before Upgrading Your Desktop PC

This is the difference between the classic ‘square screen’ (3:4) and widescreen (16:9). Like TV-sets, most new displays have been following the trend of widescreen. Although this is a personal choice, I suggest you to go with it. Widescreen displays will prove better when watching a movie, but also when playing a g


You’ll hardly find a motherboard without a built-in network card these days, and rightly so, because nearly every computer is intended to connect to the internet. The sound card is often a bit less evident. True, you’ll find sound functionality in all motherboards, but if you keep your eyes open, you can have a built-in, 5.1 surround system for just a few extra bucks. Unless you’re going to use a headphone, Gaming PC Assembly|Https://Pcbuildinsight.Com/ you’ll need this if you’re serious about gam


Similarly, you may get away with reusing old storage devices (such as a hard disk drive used as a data store rather than for installing games or applications), power supplies (as long as they’re suitable for new motherboards, drives and graphics cards), card readers or case-mounted USB h


A few months back I showed you how to install a second SATA drive , appropriate if your computer was bought sometime in the last 5 years or so. We also taught you all about partitions and formatting drives, and to completely replace your old drive with a new one - but I skipped over the subject of physically installing IDE hard drives as I considered them to be too old to warrant a tutor


Computers are complex, however, and this can lead to headaches when trying to upgrade. Nothing is more frustrating than finding out that you have a compatibility issue while you’re in the process of installing new hardware. Let’s review 4 potential trouble spots you should check before digging into your desktop’s intern


There’s nothing else to note about installing drivers. They install like any other software. Just pop in the CD or run the executable and follow the installation wizard’s instructions. You may need to reboot after installation is compl


The hard disk is similar, but this time I chose " Master with Slave Present ". Then I connect the cable up, bearing in mind that the hard drive as the master should be connected to the centre of the cable, with the slave CD-ROM drive being added at the


The motherboard is the battleground of your computer. It’ll be the host of all your hardware components and will allow them to interact. Below we’ll review the things you’ll have to consider upon picking yourself a motherbo


Selling your old and unused equipment on eBay might be something you do after paying for the upgrade, but it can prove a useful option, especially if you take the trouble to look after your hardware, keep it clean and dust free and – importantly – keep the boxes and instructions. Listing boxed items on eBay yields far better results than simply listing the item with a photo of it taken as it is removed from your


Now that you’ve cloned data to the SSD, or decided to do a fresh install, you need to make the SSD your boot drive. This can be done only by entering your computer’s BIOS. Reboot the computer and then press the BIOS hotkey at the first boot screen (this is usually Delete or F12). Your operating system will not boot and BIOS will appear inst


Connect the SATA cable into one of these ports and connect the other end to the SSD. Note the L-shape design of the connection. This makes it impossible to install it in the wrong direction without a ridiculous amount of eff


Always check how a new piece of hardware will connect to your motherboard. The most common connections are SATA (for hard drives and optical drives) and PCI Express (for video cards, sound cards and network adapters), but there are oth


To keep in business , we need to account for recent developments, and hop on any of them as soon as possible. Remaining stuck with older technology is one of the best ways to get left behind in the long run. Hence, there are a few additional things we need to look


Everything inside a computer must connect to the motherboard for it to function. Most motherboards have a significant number of connectors for installing new hardware, but the number is finite, and can be filled to capacity more quickly than you’d th


2. The cable length will affect your choice too, as IDE cables are usually quite short. If the CD-ROM is far from the hard drives, you will need one cable for the hard drives, and another going to the CD-


Once open, locate the drive bays. These are usually at the front of the case below the large optical drive bays. The bays themselves are usually just metal brackets with screw holes, though some more expensive cases will custom "tool-less" mounting system. If your case has such a system you may need to refer to it for mounting instructi


Some cases have USB ports on the front, which need to be connected to the motherboard to be functional, the pins for which are situated next to the switch pins we just connected. If you're unlucky, you’ll have a bundle of 8 cables which must connected one by one to the matching jum